df005s thru df10s vishay general semiconductor document number: 88573 revision: 30-jan-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 1 miniature glass passivated single-phase surface mount bridge rectifiers features ? ul recognition, file number e54214 ? ideal for automated placement ? high surge current capability ? meets msl level 1, per j-std-020, lf maximum peak of 250 c ? solder dip 260 c, 40 s ? component in accordance to rohs 2002/95/ec and weee 2002/96/ec typical applications general purpose use in ac-to-dc bridge full wave rectification for smps, lig hting ballaster, adapter, battery charger, home appliances, office equipment, and telecommunication applications. mechanical data case: dfs epoxy meets ul 94v-0 flammability rating terminals: matte tin plated leads, solderable per j-std-002 and jesd22-b102 e3 suffix for consumer grade, meets jesd 201 class 1a whisker test polarity: as marked on body primary characteristics i f(av) 1 a v rrm 50 v to 1000 v i fsm 50 a i r 5 a v f 1.1 v t j max. 150 c case style dfs ~ ~ ~ ~ note: (1) units mounted on p.c.b. with 0.51 x 0.51" (13 x 13 mm) copper pads maximum ratings (t a = 25 c unless otherwise noted) parameter symbol df005s df01s df02s df04s df06s df08s df10s unit device marking code df005s df01s df02s df04s df06s df08s df10s maximum repetitive peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward output rectified current at t a = 40 c (1) i f(av) 1.0 a peak forward surge current single half sine-wave superimposed on rated load i fsm 50 a rating for fusing (t < 8.3 ms) i 2 t 10 a 2 s operating junction and storage temperature range t j , t stg - 55 to + 150 c
df005s thru df10s vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 88573 revision: 30-jan-08 2 note: (1) measured at 1.0 mhz and applied reverse voltage of 4.0 v note: (1) units mounted on p.c.b. with 0.51 x 0.51" (13 x 13 mm) copper pads ratings and characteristics curves (t a = 25 c unless otherwise noted) electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol df005s df01s df02s df04s df06s df08s df10s unit maximum instantaneous forward voltage drop per diode 1.0 a v f 1.1 v maximum dc reverse current at rated dc blocking voltage per diode t a = 25 c t a = 125 c i r 5.0 500 a typical junction capacitance per diode (1) c j 25 pf thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol df005s df01s df02s df04s df06s df08s df10s unit typical thermal resistance (1) r ja r jl 40 15 c/w ordering information (example) preferred p/n unit weight (g) preferred package code base quantity delivery mode df06s-e3/45 0.399 45 50 tube df06s-e3/77 0.399 77 1500 13" diameter paper tape and reel figure 1. derating curve output rectified current 20 40 60 8 0 100 120 140 160 0 0.5 1.0 am b ient temperat u re (c) a v erage for w ard o u tp u t c u rrent (a) 60 hz resisti v e or ind u cti v e load p.c.b. mo u nted on 0.51 x 0.51" (13 x 13 mm) copper pads figure 2. maximum non-repetitive peak forward surge current per diode 1 10 100 0 10 20 30 40 50 60 nu m b er of cycles at 60 hz peak for w ard s u rge c u rrent (a) t j = 150 c single sine- w a v e 1.0 cycle
df005s thru df10s vishay general semiconductor document number: 88573 revision: 30-jan-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 3 package outline dimensions in inches (millimeters) figure 3. typical forward characteristics per diode figure 4. typical reverse leak age characteristics per diode 0.4 0.6 0. 8 1.0 1.2 1.4 0.01 0.1 1 10 instantaneo u s for w ard v oltage ( v ) instantaneo u s for w ard c u rrent (a) t j = 25 c p u lse w idth = 300 s 1 % d u ty cycle 0 20 40 60 8 0 100 0.01 0.1 1 10 100 t j = 125 c t j = 50 c percent of rated peak re v erse v oltage (%) instantaneo u s re v erse c u rrent ( a) figure 5. typical juncti on capacitance per diode figure 6. typical transient thermal impedance 1 10 100 1 10 100 re v erse v oltage ( v ) j u nction capacitance (pf) t j = 25 c f = 1.0 mhz v sig = 50 m v p-p 0.01 0.1 1 10 100 0.1 1 10 100 t - heating time (s) transient thermal impedance (c/ w ) mountin g pad la yout 0.255 (6.5) 0.245 (6.2) 0.013 (0.330) 0.009 (0.241) 0.060 (1.524) 0.040 (1.016) 0.404 (10.3) 0.013 (0.330) 0.003 (0.076) 0.047 (1.20) 0.040 (1.02) 0.205 (5.2) 0.195 (5.0) 0.335 ( 8 .51) 0.320 ( 8 .13) 0.130 (3.3) 0.120 (3.05) 45 0.3 8 6 (9. 8 0) case style dfs 0.404 max. (10.26 max.) 0.205 (5.2) 0.195 (5.0) 0.047 mi n . (1.20 mi n .) 0.060 mi n . (1.52 mi n .)
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
